Jul. 01, 2019

Acceptance of 3D Scanning in Quality Control

Due to its high accuracy, probing gained the approval of quality control and quality assurance professionals over the last few decades. However, the major players in the industry are now moving toward 3D scanning, which was once reserved for product development.

Why are today’s industry experts placing their trust in 3D scanning and granting it a significant role in quality control? The primary reason for placing probing and 3D scanning at the same level of preference is that the latter has reached a level of accuracy that approaches traditional probing methods. In addition, 3D scanning provides quality control and quality assurance professionals with more data, more details, and more information, which also motivate them to opt for this technology.

What led to the increase in 3D scanning accuracy?

The capacity of a 3D scanner depends on the components inherent in its design. Cameras and advances optical calibration techniques, which are important components of a 3D scanner, have acquired a significant resolution, while light sources have also become better defined. These improved components result in higher accuracy. Nevertheless, 3D scanning is not going to stop improving. The same as computers, innovation will continue to respond to industry challenges.

Need for Automation

The industry of tomorrow is moving toward automated quality control. In Industry 4.0, where the entire manufacturing process is connected, integrated, and automated, 3D scanning is better suited than probing to inspect parts as they are manufactured. Indeed, 3D scanners can quickly capture a lot of data, which are essential to the 4.0 manufacturing process.

Expertise Required

A coordinate measuring machine (CMM) requires the intervention of a high-quality workforce with both the training and the experience to maneuver a probing system. These experts, who are essential to the proper functioning of probing tools, are sometimes difficult to find and keep, thus undermining the quality control process. With the latest 3D scanners, however, operating or programming experience is not specifically required. 3D scanning, therefore, is accessible to all.

Design-Oriented Geometry

We live in an era in which design is very important.

Companies want to distinguish themselves from the competition by their design-oriented geometry and form. They develop parts with various shapes, sizes, and finishes. Inspecting those complex geometries requires a multitude of high-quality data easily accessible with 3D scanning.
Now that the range of accuracy granted by 3D scanning exceeds the threshold required for quality control and that its development helps to respond to industry challenges, all the benefits of the technology, such as its speed, ease-of-use, and portability, can be applied to improve the quality of products and the work of quality control professionals.


3D scanners are tools designed to be portable. They can be moved on the production floor, go where the part is, and perform inspections in unstable environments. Unlike fixed CMMs, they do not require a dedicated room, do not have to be fixed to the floor or placed in a controlled environment.
With portable measurement tools, the manufactured part does not have to be brought to the measurement system. Therefore, it is possible to control the preliminary and intermediate stages of the production process as well as all the small deformations that can occur during the manufacturing steps. With probing, however, it is more complicated to understand - due to the lack of data - the effects of a stamping or a folding that could have deformed or twisted other sections of the part.


With a 3D scanner, the user simply has to point and shoot. Not only is the tool easy to handle, but also its data is simple to interpret. A colormap provides a quick and easy visualization of the part deformations. This feature enables users to easily see if a part is within the required tolerances, or if it has been deformed or twisted. Measurement points are obtained and visualized more easily than with a CMM, which does not provide a visual interpretation and takes time to capture, analyze, and portray the information. As a result, 3D scanning allows for parts to be adjusted easily and quickly.


The ability of 3D scanners to capture a lot of points combined with the ability of computers to process a lot of data makes calculations much faster. This increased capacity will not stop, as the speed of data processing will continue to increase with the innovation and evolution of the technology. Indeed, the sensors that comprise a 3D scanner already offer better accuracy and better resolution than those developed a decade ago. Added to this are the continued improvements to computers’ processes and capacities for analysis. This synergy suggests further developments and innovations that will surely surprise us.

3D Scanning: Technology of the Future

Probing is already a mature technology, while 3D scanning has enormous potential, as many engineers work to improve, develop, and innovate it. It's the technology of the future. Although the levels of resolution and accuracy are already high, they will continue to evolve, which will bring even more data, more details, and more information. This will open the door to inspecting even more complex parts. We are on the increase slope of the innovation curve. One day, we will surely be able to control 100 % of parts. Quality control calls for inspections on 100 % of dimensions on 100 % of parts. The more you control parts, the less you have to rebuild them. This means fewer material losses, fewer rejections, and fewer returns. We are on our way to perfect parts.

Return on Investment

Compared to fixed CMMs, 3D scanners are not only cheaper to buy, but they also measure faster and require less expertise. As a result, less time is spent on each part, with less specialized resources, while spending less money on technology. The vast majority of inspections can now be performed with 3D scanning: quickly, directly where the part is without having to move it. Only very high tolerance inspections can be directed to and measured with probing.

A 3D scanner is an essential tool in the quality control toolbox. It is not meant to replace everything, but it is there to offload the CMM, to do more with complex geometries, and to reserve the CMM for the few points that require a critical accuracy. This is how the alliance of the two technologies provides a perfect solution. Since the majority of inspections can now be performed with a 3D scanner, why not clear the majority of inspections with a tool that offers an impressive ROI and leave delicate and important features to probing. This complementarity between 3D scanning and probing proves to be a winning combination - until 3D scanning reaches and surpasses the level of accuracy offered by probing.

Zitat: The ability of 3D scanners to capture a lot of points combined with the ability of computers to process a lot of data makes calculations much faster. This increased capacity will not stop, as the speed of data processing will continue to increase with the innovation and evolution of the technology.



AMETEK GmbH – Division Creaform Deutschland
Meisenweg 37
70771 Leinfelden-Echterdingen
Phone: +49 711 1856 8030

Register now!

The latest information directly via newsletter.

To prevent automated spam submissions leave this field empty.